open

Open a file-based or command pipeline channel 

Tclsh Built-In Commands


SYNOPSIS

open fileName

open fileName access

open fileName access permissions


DESCRIPTION

This command opens a file, serial port, or command pipeline and returns a channel identifier that may be used in future invocations of commands like read, puts, and close. If the first character of fileName is not | then the command opens a file: fileName gives the name of the file to open, and it must conform to the conventions described in the filename reference page.

The access argument, if present, indicates the way in which the file (or command pipeline) is to be accessed. In the first form access may have any of the following values:

r 

Open the file for reading only; the file must already exist. This is the default value if access is not specified.

r+ 

Open the file for both reading and writing; the file must already exist.

w 

Open the file for writing only. Truncate it if it exists. If it doesn't exist, create a new file.

w+ 

Open the file for reading and writing. Truncate it if it exists. If it doesn't exist, create a new file.

a 

Open the file for writing only. If the file doesn't exist, create a new empty file. Set the initial access position to the end of the file.

a+ 

Open the file for reading and writing. If the file doesn't exist, create a new empty file. Set the initial access position to the end of the file.

In the second form, access consists of a list of any of the following flags, all of which have the standard POSIX meanings. One of the flags must be either RDONLY, WRONLY or RDWR.

RDONLY 

Open the file for reading only.

WRONLY 

Open the file for writing only.

RDWR 

Open the file for both reading and writing.

APPEND 

Set the file pointer to the end of the file prior to each write.

CREAT 

Create the file if it doesn't already exist (without this flag it is an error for the file not to exist).

EXCL 

If CREAT is also specified, an error is returned if the file already exists.

NOCTTY 

If the file is a terminal device, this flag prevents the file from becoming the controlling terminal of the process.

NONBLOCK 

Prevents the process from blocking while opening the file, and possibly in subsequent I/O operations. The exact behavior of this flag is system- and device-dependent; its use is discouraged (it is better to use the fconfigure command to put a file in nonblocking mode). For details refer to your system documentation on the open system call's O_NONBLOCK flag.

TRUNC 

If the file exists it is truncated to zero length.

If a new file is created as part of opening it, permissions (an integer) is used to set the permissions for the new file in conjunction with the process's file mode creation mask. Permissions defaults to 0666.


COMMAND PIPELINES

If the first character of fileName is | then the remaining characters of fileName are treated as a list of arguments that describe a command pipeline to invoke, in the same style as the arguments for exec. In this case, the channel identifier returned by open may be used to write to the command's input pipe or read from its output pipe, depending on the value of access. If write-only access is used (for example, access is w), then standard output for the pipeline is directed to the current standard output unless overridden by the command. If read-only access is used (for example, access is r), standard input for the pipeline is taken from the current standard input unless overridden by the command.


SERIAL COMMUNICATIONS

If fileName refers to a serial port, then the specified serial port is opened and initialized in a platform-dependent manner. Acceptable values for the fileName to use to open a serial port are described in the PORTABILITY ISSUES section.


CONFIGURATION OPTIONS

The fconfigure command can be used to query and set the following configuration option for open serial ports:

-mode baud,parity,data,stop 

This option is a set of 4 comma-separated values: the baud rate, parity, number of data bits, and number of stop bits for this serial port. The baud rate is a simple integer that specifies the connection speed. Parity is one of the following letters: n, o, e, m, s; respectively signifying the parity options of none, odd, even, mark, or space. Data is the number of data bits and should be an integer from 5 to 8, while stop is the number of stop bits and should be the integer 1 or 2.

-pollinterval msec 

This option, available only on Windows for serial ports, is used to set the maximum time between polling for fileevents. This affects the time interval between checking for events throughout the Tcl interpreter (the smallest value always wins). Use this option only if you want to poll the serial port more often than 10 msec (the default).

-lasterror 

This option is available only on Windows for serial ports, and is query only (will only be reported when directly requested). In case of a serial communication error, read or puts returns a general Tcl file I/O error. fconfigure -lasterror can be called to get a list of error details (for example, FRAME RXOVER).


PORTABILITY ISSUES

Windows (all versions) 

Valid values for fileName to open a serial port are of the form comX:, where X is a number, generally from 1 to 4. This notation only works for serial ports from 1 to 9, if the system happens to have more than four. An attempt to open a serial port that does not exist or has a number greater than 9 will fail. An alternate form of opening serial ports is to use the file name \\.\comX, where X is any number that corresponds to a serial port; please note that this method is considerably slower on Windows 95 and Windows 98.

Windows NT 

When running Tcl interactively, there may be some strange interactions between the real console, if one is present, and a command pipeline that uses standard input or output. If a command pipeline is opened for reading, some of the lines entered at the console will be sent to the command pipeline and some will be sent to the Tcl evaluator. If a command pipeline is opened for writing, keystrokes entered into the console are not visible until the the pipe is closed. This behavior occurs whether the command pipeline is executing 16-bit or 32-bit applications. These problems only occur because both Tcl and the child application are competing for the console at the same time. If the command pipeline is started from a script, so that Tcl is not accessing the console, or if the command pipeline does not use standard input or output, but is redirected from or to a file, then the above problems do not occur.

Windows 95 

A command pipeline that executes a 16-bit DOS application cannot be opened for both reading and writing, since 16-bit DOS applications that receive standard input from a pipe and send standard output to a pipe run synchronously. Command pipelines that do not execute 16-bit DOS applications run asynchronously and can be opened for both reading and writing.

When running Tcl interactively, there may be some strange interactions between the real console, if one is present, and a command pipeline that uses standard input or output. If a command pipeline is opened for reading from a 32-bit application, some of the keystrokes entered at the console will be sent to the command pipeline and some will be sent to the Tcl evaluator. If a command pipeline is opened for writing to a 32-bit application, no output is visible on the console until the the pipe is closed. These problems only occur because both Tcl and the child application are competing for the console at the same time. If the command pipeline is started from a script, so that Tcl is not accessing the console, or if the command pipeline does not use standard input or output, but is redirected from or to a file, then the above problems do not occur.

Whether or not Tcl is running interactively, if a command pipeline is opened for reading from a 16-bit DOS application, the call to open will not return until end-of-file has been received from the command pipeline's standard output. If a command pipeline is opened for writing to a 16-bit DOS application, no data will be sent to the command pipeline's standard output until the pipe is actually closed. This problem occurs because 16-bit DOS applications are run synchronously, as described above.

Macintosh 

Opening a serial port is not currently implemented under Macintosh.

Opening a command pipeline is not supported under Macintosh, since applications do not support the concept of standard input or output.

UNIX  

Valid values for fileName to open a serial port are generally of the form /dev/ttyX, where X is a or b, but the name of any pseudo-file that maps to a serial port may be used.

When running Tcl interactively, there may be some strange interactions between the console, if one is present, and a command pipeline that uses standard input. If a command pipeline is opened for reading, some of the lines entered at the console will be sent to the command pipeline and some will be sent to the Tcl evaluator. This problem only occurs because both Tcl and the child application are competing for the console at the same time. If the command pipeline is started from a script, so that Tcl is not accessing the console, or if the command pipeline does not use standard input, but is redirected from a file, then the above problem does not occur.

See the PORTABILITY ISSUES section of the exec command for additional information not specific to command pipelines about executing applications on the various platforms


PORTABILITY

Windows 8.1. Windows Server 2012 R2. Windows 10. Windows Server 2016. Windows Server 2019. Windows 11. Windows Server 2022.


AVAILABILITY

PTC MKS Toolkit for Power Users
PTC MKS Toolkit for System Administrators
PTC MKS Toolkit for Developers
PTC MKS Toolkit for Interoperability
PTC MKS Toolkit for Professional Developers
PTC MKS Toolkit for Enterprise Developers
PTC MKS Toolkit for Enterprise Developers 64-Bit Edition


SEE ALSO

Commands:
close, exec, filename, gets, puts, read


PTC MKS Toolkit 10.4 Documentation Build 39.